Getting things started Von and Jason would first apply a 3-inch body drop to the Toy. Next a set of 2"drop spindle would be installed up front along with a set of KUSTOMWERKS upper and lower tubular control arms. The rear would then be set up with a custom rear clip w/cantilever, four link. Before putting the body back on the newly worked frame a few coats of paint would help the custom appeal.  
|
  Needing to get the frame and body off the ground, Von would go with a complete air ride kit. The kit would include a 12gallon tank w/Co2 bottle, ½” Parker valves, rear air shocks and air bags upfront. The Toyota would now lay hard on the 20" Niche Rhine’s wrapped in 225/30/20 BFG rubber.
|
