Starting the project out the Accord would be fitted with a fully fabricated front suspension housing Brisland air cylinders, all copper line running through 3/8 ASCO valves on 1 compressor, a 5 gallon airbrushed tank and finished off with a rear chrome accumulator.   
|
  Next a custom sway bar would be chrome dipped along with the upper control arms and core support. Stainless steel brake line would then be installed for added show points. With the air in place the Accord could now tuck the 18 inch Rozzi Detention wheels wrapped in 215/35 Nankang rubber.
|
