With first wanting to bring the body down lower to the pavement Daniel would drop the Chevy off to Jessie from Air Ride by Jessie. While there, Jessie would first install a 9-inch step notch with ¼ plate steel. A panhard bar would then be installed to help bring things down in the rear. Helping to level things up with bringing the front down Jessie would then install a set of DJM spindles.   A set of Belltech Nitro shocks would be set in place at all corners to help bring a better ride about. With the need for adjustability, Jessie would then install Slam bags at all 4 corners while two Viar 450’s, two 5 gallon tanks, 3/8 parker gold valves with 3/8’s line which would all be mounted under the bed and help supply the air.
|
Now that the suspension was handled it would be time to work over the exterior. Street Sweeper Customs of Conway, AR would work over the body needs. While working over the front end, a steel cowl hood with GMC full phantom grille would replace the stock items. Continuing the modifications, a tear drop bumper would be equipped upfront while the doors would be shaved along with the antenna, stake pockets, tailgate handle, wiper cowl and taillights.   
|
