2. Once the doors panels are off, you will then need to pull back the plastic from the door to get to the bolts.  3. You will need an extension to reach the bolts to unbolt. The one closest to the edge of the door is a pain to get to but a skinny extension makes things easier. 
|
  4. Once you have the door handles out you will need to grind down the complete edge of the door handle itself along with the door leaving clean metal for the Evercoat Everglass and Duramix 4125 (2 part epoxy) to bond to. The rear handles come out nicely, the front ones you don't necessarily need to remove all pieces. We managed to leave the lock bar on making things easier to put back together.
|
